LR pixel


The complex of ISO 1CC containers and tents,which is intended for the following activities:
  • COVID-19 detection - ThEA technology
  • COVID-19 detection - antigen testing
  • Vaccination against COVID-19
The sampling point with an immediate evaluation of virus tests consists of a certified ISO 1CC container and attached tents; the tents are designed as a waiting room and a sampling point for the collection of biological samples from patients. These samples are passed to the laboratory through a small window so that patients are fully separated from the laboratory area at all times. Laboratory capacity - up to several thousand samples per day.

This complex can be used as a vaccination center without any modification (at most with an additional freezer boxes according to the vaccine requirements).

The ISO 1CC certified container equipped with the CSC label guarantees the transportability of the whole complex (stored in the container) by any means intended for the transport of ISO containers, anywhere in the world.


Container VARIEL - "PCR Laboratory" is designed for the detection of COVID 19 exactly as WHO recommended.Routine confirmation of cases of COVID-19 is based on detection of unique sequences of virus RNA by NAAT such as real-time reverse-transcription polymerase chain reaction (rRT-PCR) with confirmation by nucleic acid sequencing when necessary. The viral genes targeted so far include the N, E, S and RdRP genes. RNA extraction should be done in a biosafety cabinet in a BSL-2 or equivalent facility.

Decontamination Containers

They are designed for mass decontamination of persons, even wounded (non-walking), in field conditions. Design of containers is based on aluminum alloy panels that are fitted to a steel container frame.

Loading on truck is provided by hook lift container handling unit built according to DIN 30722-1. Deployment time is limited to 30 minutes. The container is equipped with an electric generator to ensure independent operation. The container is equipped with tent shelters, the roof of which is formed by the open door wings of the container.

ISO 1CC Medical Container - CT workplace

The container is used for CT examination followed by computer acquisition and diagnostics. It is a workplace that is part of the medical support of the field hospital in field conditions. Operation of the container is possible after connection to electric power supply, drinking water supply and waste water collection system.

The simple mechanical principle of the container deployment ensures its reliability and the possibility of reliable deployment even in unfavourable conditions without the need to be connected to power supply (e.g. no need for any hydraulic or electric supply for container deployment). However, the slide mechanism can be fitted with a suitable drive if required by the customer. Putting the container from the transport to working state takes about 50 minutes, including full commissioning of the inner part of the container – i.e. preparation of medical equipment for patient examination.

SIEMENS SOMATOM Perspective 128, the highest level of CT scanner, meets the demands of modern healthcare. The scanner has a state-of-the-art slim gantry design, a UFC detector system, and a 0.6-second gantry rotation time for efficient, high-quality CT imaging. The system is equipped with unique Interleaved Volume Reconstruction (IVR) technology to detect even the smallest diagnostic details using information from 128 layers. The resulting data records are ideally suited for additional 2D / 3D processing.


Ambulances are designed for heavy-medium terrain and roads, to ensure removal of patients and wounded under medical supervision to medical facilities.

The sandwich box body (shelter) is built into an IVECO truck with a short cab for a crew of 1+1.

ISO 1 DD expandable - watchtower

ISO 1DD WATCH TOWER is a special container designed for use in the military services, field camps, foreign missions, detached units, to protect property, borders, security, etc. Its main advantage is the possibility of rapid deployment, respectively rapid transfer and return from transport to operating state. The hydraulic lifting mechanism ensures that the watch tower is easily expanded and deployed. The container can only be used when connected to electric power supply or mobile electric power generator.

Emergency survival containers

The Emergency Survival Container (KNP) is designed for small detached units and groups (up to 30 people) within the Integrated Rescue System (IRS), armed forces and humanitarian organizations. Primarily serves to provide basic equipment for staff commander and intervening members of the IRS. It can also be used to ensure emergency survival of up to 30 people.

It is an ISO 1C expandable container with side slides. The transition from transport to operational state is carried out mechanically.

The KNP is equipped with an electric generator, a drinking water tank and a waste water tank and a separate water management. Therefore, it can be used in areas without the possibility of connection to utility networks. The container also allows wastewater to be pumped into distant waste water tanks. When deployed, it can supply other connected equipment with electricity thanks to the electric power generator. If the container is in the transport state, the full power of the generator can be used to supply other equipment.

ISO 1C Refrigerated Containers

The container is primarily intended for the storage and transport of packaged and unpackaged food. Furthermore, storage of blood, medical material and materials requiring storage in a certain thermal regime.

The operation of the container is ensured by a built-in diesel generator with the possibility of connection to external power source.

The design of the container with the cooling unit ensures an internal operating temperature of -18 ° C to + 3 °C at outdoor air temperatures of -32 ° C to + 49 ° C.

Containers are available as a single and double-chamber versions.

Field kitchen in ISO 1C containers – Kitchen and Food Service

Field kitchen consists of two ISO 1C containers and is intended for the preparation, storage and distribution of up to 250 meals 3 times a day in field conditions. Field kitchen operation is possible only after connection to a permanent electric power supply (or a mobile electric power generator), to a drinking water source (stationary or mobile) and to sanitary containers ISO 1CX – waste water tank. The Kitchen container is equipped with a tent shelter intended for food preparation and the Food Service container has a tent shelter in which there is a footbridge intended for food delivery. Both containers are equipped with air conditioning units.

Mobile Doctor - Set of ISO Containers

The mobile doctor complex is a fully independent mobile medical workplace for the providing of medical care in field conditions. It consists of a medical container (ISO 1CC expandable container), which is located on the car chassis, and a logistics container, which is located on the attached container trailer. The workplace enables the performance of medical procedures focused on emergency measures to rescue the wounded or sick. These measures include in particular:

  • surgical procedures;
  • non-surgical treatments;
  • resuscitation of the wounded and affected;

The workplace can also work as:

  • Intensive Care Unit;
  • GP;
  • specialized equipment - gynecologist, dermatologist, ophthalmologist, etc.

The logistic part of the workplace is intended for the transportation of medical materials, logistic material, it houses an inflatable tent serving as a preparatory workplace, and also includes a power generator and water management. The workplace is completely autonomous and is able to operate anywhere without any external supplies.

ISO 1C accommodation containers with ballistic protection

It is an accommodation container of ISO 1C dimensions, which is designed for accommodation of people in field conditions with ballistic and explosion protection. Container provides a day and night rest for up to 4 people.

The cladding meets the requirements for protection against a milder threat according to Level M1 of Annex A to AEP-55 (C) VOL 2, Procedures for Assessing the Level of Protection of Armored Vehicles - Mine Threat, STANAG 4569, Ed. 3.

The container provides protection against an improvised threat (IED) as defined by an explosion of a 15 kg TNT spherical charge at a distance of 15 m from the container sidewall at a charge height of 1 m above the horizontal terrain plane common to the IED and the container.

Medical Modules for Field Hospitals - ISO 1C Containers

- Pharmacy - drug dispenser - serves for storage, registration, dispensing of medicaments and medical supplies for individual workplaces in field conditions

- Medical material storage - an essential part of the pharmacy complex dispenses medicines and medical supplies to individual workplaces in field conditions

Container ISO 1C - Sterilization Unit

Sterilization unit is an essential part of the medical field modules and ensures the sterilization of material and medical devices according to applicable hygienic and operational standards

Other ISO Containers for army use      

Other ISO military containers intended for deployment in field conditions, which serve as command centers, offices, workshops for general use, operational centers for deployment in the event of natural and nuclear disasters, data storage, laundries, warehouses, etc.

ISO 1C container – drinking water tank

The container (volume of 8 m3) is designed for filling, storage, dispensing and transport of drinking water from proven sources with consumption within 48 hours. Filling with drinking water is ensured in three independent ways - filling with pressurized water, filling from mobile vehicles equipped with a dispensing mechanism for this purpose or pumping from proven sources that are not equipped with a dispensing mechanism. There are 4 independent consumption points for drinking water supply, 3 of which are designed for cold water (8°C ) and one is designed for hot water (50°C to 60°C). The container is air-conditioned (heating / cooling) with the possibility to set the required temperature of the indoor environment and is equipped with an integrated electric power generator for all equipment, which is able to work even when the container is in transport mode.

ISO 1CC - sandwich containers

Containers serve as part of the command post. The container consists of a supporting frame that is hot-dip galvanized and walls of sandwich panels. The size of the container corresponds to ISO 1CC containers.

ISO 1C sanitary containers

Sanitary containers provide basic hygienic needs to persons in field conditions. They can be configured as toilets, showers or combination of these.

Container superstructures for ZIL military vehicles

Container superstructure - shelter for ZIL 131 military truck is designed as mobile electronic device. The interior of the container is divided into two unequal spaces by a partition with double sliding doors. Larger air-conditioned room is designed for technology, smaller room with entrance door is designed for operating staff.

Multipurpose Containers for Fire Brigade

These are "box" type design containers. Manufactured as a welded steel construction with an anti-corrosion finish and aluminum sheets. The rollers are rubberised and allow handling on the floor in the garage.

The frame of the container is designed acc. to the loading mechanism - single-arm carrier CTS 05-37-S (height of the container fitted hook - 1,000 mm)

Contact us

If you are interested, do not hesitate to contact us for an individual offer.